APC Back-UPS 1400VA has a LED status display for power status indication. APC Back-UPS 1400VA automatically starts up all connected equipments when utility power returns. APC Back-UPS 1400VA periodic battery self-test enables early detection of a faulty battery that needs replacement. APC Back-UPS 1400VA automatically regulates Voltage between Low and High depending on what the equipment needs.

Features.

Body.

• Dimensions (Maximum Height x Maximum Width x Maximum Depth): 215mm , 21.5CM x 130mm , 13.0CM x 336mm , 33.6CM
• Dimensions (Shipping Height x Shipping Width x Shipping Depth): 295mm , 29.5CM x 245mm , 24.5CM x 440mm , 44.0CM
• Net Weight: 12.0KG
• Shipping weight: 12.94KG

Outputs.

• Output power capacity: 700Watts / 1.4 kVA
• Max Configurable Power (Watts): 700Watts / 1.4 kVA
• Nominal Output Voltage: 230V
• Output Frequency (sync to mains): 50/60 Hz +/-1 Hz
• Output Frequency (not synced): 50/60 Hz +/-1 Hz
• Topology: Line Interactive
• Waveform type: Stepped approximation to a sinewave
• Transfer Time: 8ms typical : 10 ms maximum

Inputs.

• Nominal Input Voltage: 230V
• Input frequency: 50/60 Hz +/- 3 Hz (auto sensing)
• Input Connections: IEC-320 C14, NEMA 5-15P
• Cord Length: 1.22meters
• Input voltage range for main operations: 150 – 280 V
• Number of Power Cords: 2
• Type of Input Protection Required: 3-pole breaker
• Maximum Input Current: 6.0 A
• Input Power Factor at Full Load: 0.5

Batteries and Runtime.

• Battery type: Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof
• Included Battery Modules: 1
• Typical recharge time: 8 hours
• Replacement Battery: APCRBC113
• Expected Battery Life (years): 2 – 5

Communications and management.

• Control panel: LED status display with On Line ; On Battery ; Replace Battery and Overload indicators
• Audible Alarm: Alarm when on battery ; distinctive low battery alarm ; overload continuous tone alarm

Surge Protection and Filtering.

• Surge energy rating: 273 Joules
• Data Line Protection: RJ-11 Modem/Fax protection

Environmental.

• Operating Temperature: 0 – 40 °C
• Operating Relative Humidity: 0 – 95% non-condensing %
• Operating Elevation: 0 – 3000meters
• Storage Temperature: -15 – 45 °C
• Storage Relative Humidity: 0 – 95% non-condensing %
• Storage Elevation: 0 – 9000meters
• Audible noise at 1 meter from surface of unit: 45.0 dBA

Conformance.

• Equipment protection policy: No EPP for ASEAN
• Standard warranty: 2 years repair or replace

Sustainable Offer Status.

• RoHS: Compliant
• REACH: Contains No SVHCs

Mecer 2KVA has a LED status display for power status indication. Mecer 2KVA automatically restarts while AC is recovering. Mecer 2KVA offers protection against overload, discharge and overcharge protection. Mecer 2KVA automatically regulates Voltage between Low and High depending on what the equipment needs.

Features.

Body.

• Dimensions (Maximum Height x Maximum Width x Maximum Depth): 205mm , 20.5CM x 146mm , 14.6CM x 397mm , 39.7CM
• Weight: 11.5 KGs

Outputs.

• AC Voltage Regulation (Batt. Mode): ± 10 %
• Frequency Range (Batt. Mode): 60 Hz or 50 Hz ± 1 Hz
  
• Transfer Time: 2 – 6ms, 10 ms max
• Waveform (Batt. Mode): Simulated Sine Wave

Inputs.

• Capacity: 2000VA / 1200W
• Voltage: 110/120 VAC or 220/230/240 VAC
• Voltage Range: 81-145 VAC or 162-290 VAC

Communications and management.

• Control panel: LED status display with On Line ; On Battery ; Replace Battery and Overload indicators
• Audible Alarm: Alarm when on battery ; distinctive low battery alarm ; overload continuous tone alarm

Environmental.

• Operating Temperature: 0 – 40 °C
• Operating Relative Humidity: 0 – 90% non-condensing %
• Noise: 40.0 dBA

Mecer 650VA has a LED status display for power status indication. Mecer 650VA automatically restarts while AC is recovering. Mecer 650VA offers protection against overload, discharge and overcharge protection. Mecer 650VA automatically regulates Voltage between Low and High depending on what the equipment needs.

Features.

Body.

• Dimensions (Maximum Height x Maximum Width x Maximum Depth): 142mm , 14.2CM x 100mm , 10.0CM x 287mm , 28.7CM
• Weight:4.25 KGs

Outputs.

• AC Voltage Regulation (Batt. Mode): ± 10 %
• Frequency Range (Batt. Mode): 60 Hz or 50 Hz ± 1 Hz
  
• Transfer Time: 2 – 6ms, 10 ms max
• Waveform (Batt. Mode): Simulated Sine Wave

Inputs.

• Voltage: 110/120 VAC or 220/230/240 VAC
• Voltage Range: 81 – 145 VAC / 162 – 290 VAC
• Frequency Range: 60/50 Hz (auto sensing)

Batteries and Runtime.

• Battery type: 12 V/7 AH x 1
• Typical recharge time: 4 – 6 hours recover 90% capacity

Communications and management.

• Control panel: LED status display with On Line ; On Battery ; Replace Battery and Overload indicators
• Audible Alarm: Alarm when on battery ; distinctive low battery alarm ; overload continuous tone alarm

Environmental.

• Operating Temperature: 0 – 40 °C
• Operating Relative Humidity: 0 – 90% non-condensing %
• Noise: 40.0 dBA

APC Back-UPS 700VA has a LED status display for power status indication. APC Back-UPS 700VA periodic battery self-test enables early detection of a faulty battery that needs replacement. APC Back-UPS 700VA automatically regulates Voltage between Low and High depending on what the equipment needs.

Features.

Body.

• Dimensions (Maximum Height x Maximum Width x Maximum Depth): 200mm , 20.0CM x 115mm , 11.5CM x 256mm , 25.6CM
• Dimensions (Shipping Height x Shipping Width x Shipping Depth): 275mm , 27.5CM x 295mm , 29.5CM x 340mm , 34.0CM
• Net Weight: 6.0 KG
• Shipping weight: 6.5 KG

Outputs.

• Output power capacity: 390Watts / 700VA
• Max Configurable Power (Watts): 390Watts / 700VA
• Nominal Output Voltage: 230V
• Output Frequency (sync to mains): 50/60 Hz +/-1 Hz
• Topology: Line Interactive
• Waveform type: Stepped approximation to a sinewave
• Output Connections: (1) IEC Jumpers (Battery Backup); (4) IEC 320 C13 (Battery Backup)
• Transfer Time: 4ms typical

Inputs.

• Nominal Input Voltage: 230V
• Input frequency: 50/60 Hz +/- 3 Hz (auto sensing)
• Input Connections: IEC-320 C14
• Cord Length: 1.22meters
• Input voltage range for main operations: 140 – 300V
• Number of Power Cords: 1

Batteries and Runtime.

• Battery type: Maintenance-free sealed Lead-Acid battery with suspended electrolyte ; leakproof
• Typical recharge time: 6 hours
• Replacement Battery: APCRBC110
• Expected Battery Life (years): 3 – 5

Communications and management.

• Interface Port(s): USB
• Control panel: LED status display with On Line : On Battery : Replace Battery and Overload indicators
• Audible Alarm: Alarm when on battery : distinctive low battery alarm : overload continuous tone alarm

Surge Protection and Filtering.

• Surge energy rating: 273 Joules
• Data Line Protection: RJ-11 Modem/Fax/DSL protection (two wire single line)

Environmental.

• Operating Temperature: 0 – 40 °C
• Operating Relative Humidity: 0 – 95% non-condensing %
• Operating Elevation: 0 – 3000meters
• Storage Temperature: -15 – 40 °C
• Storage Relative Humidity: 0 – 95% non-condensing %
• Storage Elevation: 0 – 9000meters
• Audible noise at 1 meter from surface of unit: 45.0 dBA

Conformance.

• Standard warranty: 2 years repair or replace

Sustainable Offer Status.

• RoHS: Compliant
• REACH: Contains No SVHCs

APC Back-UPS 650VA.

APC Back-UPS 650VA is a backup that stores power. In case the power goes off, you will not lose your work since APC Back-UPS 650VA will act as a backup for a while, giving you time to save your work.

With alarm notification, you get notified in real-time by either an email or by your phone or tablet. You will be able to reduce the mean-time to recovery and improve your efficiency.

APC Back-UPS 650VA conducts a periodic battery self-test. By doing this, it ensures that it is always in tip-top condition and prevents any issues. APC Back-UPS 650VA also automatically adjusts the voltage so that it is right for your system.

Features.

Output.

• Max Configurable Power (Watts): 325 Watts / 650 VA
• Output Frequency (sync to mains): 50/60 Hz +/- 1 Hz Sync to mains
• Topology: Line-interactive
• Waveform type: Stepped approximation to a sinewave
• Transfer Time: 4 ms typical: 6 ms maximum

Input.

• Input frequency: 50/60 Hz +/- 3 Hz Auto-sensing
• Input voltage range for main operations: 180 – 270 V
• Number of Power Cords: 1
• Type of Input Protection Required: GL fuse
• Input Power Factor at Full Load: 0.5

Batteries & Runtime.

• Battery type: Lead-acid battery
• Included Battery Modules: 1
• Typical recharge time: 4 hour(s)
• Replacement Battery: APCRBC110
• Expected Battery Life (years): 2 – 4
• Battery Charge Power (Watts): 19 Watts
• Battery Volt-Amp-Hour Capacity: 75

Communications & Management.

• Control panel: LED Status display with online: on battery
• Audible Alarm: Alarm when on battery: distinctive low battery alarm: overload continuous tone alarm

Surge Protection and Filtering.

• Surge energy rating: 160 Joules

Physical.

• Maximum Height: 141MM/ 14.1 CM
• Maximum Width: 101 MM/ 10.1 CM
• Maximum Depth300MM/ 30.0 CM
• Net Weight: 4.33 KG
• Color: Black

Environmental.

• Operating Temperature: 0 – 40 °C
• Operating Relative Humidity: 0 – 95 %
• Operating Elevation: 0 – 1999.8meters
• Storage Temperature: -20 – 50 °C
• Storage Elevation: 0 – 14999.8meters
• Audible noise at 1 meter from surface of unit: 40.0dBA

Conformance.

• Equipment protection policy: No EPP for ASEAN
• Standard warranty: Confirm

Sustainable Offer Status.

• RoHS: Compliant

APC Back-UPS 800VA.

If you want to prevent your work from getting lost when working on your computer, you might consider getting APC Back-UPS 800VA. In case of power outages, APC Back-UPS 800VA will power your computer for a while ensuring you don’t lose any vital data or have your system damaged by the power surge.

APC Back-UPS 800VA comes with automatic power regulation that prevents your system from being damaged by sudden power surges. It also steps down high voltage and ups low voltage so that the voltage is always right for your system.

APC Back-UPS 800VA also comes with battery failure notification that notifies when the UPS battery is dead. This way, you can replace the battery without causing damage to your system.

APC Back-UPS 800VA also has intelligent battery management. It ensures that the battery is used efficiently ensuring it lasts longer in case of power outages.

Features.

Output.

• Max Configurable Power (Watts): 480 Watts / 800 VA
• Output Frequency (sync to mains): 50/60 Hz +/- 1 Hz Unsynchronized, 50/60 Hz +/- 3 Hz Sync to mains
• Topology: Line interactive
• Waveform type: Stepped approximation to a sinewave
• Transfer Time: 8 ms typical: 12 ms maximum

Input.

• Input frequency: 50/60 Hz +/- 3 Hz Auto-sensing
• Input voltage range for main operations: 150 – 280 V

Batteries & Runtime.

• Battery type: Lead-acid battery
• Typical recharge time: 8 hour(s)
• Expected Battery Life (years): 3 – 5
• RBC Quantity: 1
• Battery Charge Power (Watts): 11 Watts
• Battery Volt-Amp-Hour Capacity: 88

Communications & Management.

• Control panel: LED Status display with online: on battery
• Audible Alarm: Alarm when on battery: distinctive low battery alarm: overload continuous tone alarm

Surge Protection and Filtering.

• Surge energy rating: 273 Joules

Physical.

• Maximum Height: 215 MM/ 21.5 CM
• Maximum Width: 130 MM/ 13.0 CM
• Maximum Depth: 336 MM/ 33.6 CM
• Net Weight: 8.0KG
• Color: Black

Environmental.

• Operating Temperature: 0 – 40 °C
• Operating Relative Humidity: 0 – 95 %
• Operating Elevation: 0 – 3048 meters
• Storage Temperature: -15 – 40 °C
• Storage Elevation: 0 – 9144 meters
• Audible noise at 1 meter from surface of unit: 45.0 dBA

Conformance.

• Approvals: CE, EN/IEC 60950-1, GOST, NEMKO
• Standard warranty: Confirm

Sustainable Offer Status.

• RoHS: Compliant

LED Indicator and Audible Alarms.

Quickly understand the unit and power status through visual and audible indicators.

4 Battery Backup and Surge Protected Outlets.

Keep critical electronic equipment running when the power goes out or fluctuates at dangerous levels, therefore you can protect your work and save your data.

Data Line Surge Protection.

Guards against damaging surges and spikes traveling over an analog phone line.

USB Connectivity and PowerChute Software.

Use your computer to access additional power protection and management features:
• Preserves your work, shuts down the system during outages.
• Restart your system, minimizing work disruptions.
• Enables customization of your Back-UPS settings.
• Monitors and displays power and battery status.

Push Button Circuit Breaker.

Provides for easy recovery from circuit overloads and protects your fuse box and electronics from electrical damage.

Automatic Diagnostic Testing.

Periodic battery self-test ensures early detection of a battery that needs to be replaced, so as to ensure your unit is ready when you need it.

Easy to use “one step” battery connector

• Automatic Voltage Regulation (AVR)
  Automatically steps up low voltage and steps down high voltage to levels that are suitable for your equipment.
• Telephone dataline surge protection
  Provides protection of connected equipment from power surges traveling on telephone lines.
• USB connection
  Use your PC to access additional power protection and management features for your UPS via a USB Port.

Back-UPS Features & Benefits

APC’s Back-UPS 1400 protect your electronic equipment from damage due to power outages,surges and spikes while providing short term battery power during an outage. The Back-UPS 1400 features Automatic Voltage Regulation (AVR),which instantly adjusts high and low voltage fluctuations to safe levels for your electronics,saving battery power for when you need it most during storms and power outages. Additionally,Australian sockets make for easy-to-use connection of protected equipment.

BX1400UI Features-APC Back-UPS 1400VA, 230V, AVR, IEC Sockets

• Automatic restart of loads after UPS shutdown
• Automatically starts up the connected equipment upon the return of utility power.
• Automatic self-test
• Periodic battery self-test ensures early detection of a battery that needs to be replaced.
• Automatic Voltage Regulation (AVR)
• Automatically steps up low voltage and steps down high voltage to levels that are suitable for your equipment.
• Resettable circuit breaker
• Easy recovery from overloads; no need to replace a fuse.
• Telephone dataline surge protection
• Provides protection of connected equipment from power surges traveling on telephone lines.
• USB connection
• Use your PC to access additional power protection and management features for your UPS via a USB Port.

Back-UPS Features & Benefits